Developed for the sizing of grain and seed

- consists of 12 models with a sieve area of 8-48 m²

- can manage 2-5 fractions in a single flow

- graders accurately because of long travel via Z-flow

Feed Roller with Built-in Stirrer

- has feedgate which in combination with variable RPM control of the feed rate

- ensures by means of the stirrer that no product build-up

- is created in the inlet by light products such as grass seeds etc.

- is in sensitive to light waste material and large impurities such as stones etc.

- has built-in spring loaded safety device

Full-width Vibratory

- has stepless adjustment of the feed rate by an inverter.

- separate control panel ensures a uniform flow over the entire width of the sieve

- is self cleaning

- improves the air cleaning considerably as the product hits the pre-suction area uniformly

- is careful to leguminous seeds, beet seeds etc.

- ensures optimal capacity utilisation of the machine

- has no down time due to choked up inlet

- requires no cleaning in connection with changing products

Balanced Eccentric System 

- is fitted with counter weights ensuring steady  running  

- involving minimum stress on buildings and steel structures  

- is fitted with “heavy duty” bearings  

- ensures maximum utilisation of the cleaning effect of the sieves owing to accurately attuned stroke and RPM

Ball Box

- ensures efficient cleaning of sieves by means of rubber balls

- can maintain the cleaning effect at extremely low tempera-tures as the rubber balls are cast in a very suitable material

- is cast solid so that it prevents stuck seeds etc. (self cleaning)

- is separately mounted in the screen shoes which ensures a quick change of sieves without removing the ball boxes

Change Of Product Flow

- makes many different product flows possible according to the capacity, product, number of fractions etc.

- by means of six different diagrams in the cleaner ensures excellent purity and minimum waste

- is easily done by changing the size of the sieves and the position of the outlet trays

Screw Conveyor For Light Waste

- ensures continuous discharge of dust and light waste from the air system via screws 

- with finger flaps to ensure optimal dust separation in the expansion chamber by preventing false air from entering into the chamber

Pre and After Suction System

- is built as separate systems to ensure a precise and independent air cleaning

- separates the light particles before the material reaches the sieves

- improves the cleaning effect and results in a higher capacity

- ensures an excellent purity of the product due to the suction of light particles such as empty seeds, husks, dust etc. When the product leaves the cleaner via the air screen.

Akyurek Excell Sieves For All Purpose

- are available with round and long holes from 0,3 to 25,0 mm

- are also available as wire mesh screens are also available as screen plates with very little tolerance which ensures a minimum cleaning loss.

- are available in a standard size of 

800 mm(L) x 1250 mm(B)= 1 m, 

which can be used in more than 80% of the Akyurek Excell programme so the number of sieves needed is reduced.

Easy To Operate

- because all adjustments are placed at a suitable   height

- owing to adjustments with scales for quick and   precise re-adjustment

- since all operating handles are placed on the   same side as the outlets

- is as standard with outlets and adjustments   placed on the right hand side seen from the inlet end 

- is available in special left-hand design

Finished Product of a High Quality

- is clearly illustrated by the difference between the cleaned seed/product and the discarded light product on the air lifting system.

-Reduces in many cases the size of the subsequent processing machines

İmproved Products

Wheat

Rye

Sorghum

Barley

Oat

Sesame

Anl Seed

Poppy Seed

Sunflower

Watermelon Seed

Wheat

Maize

Raw Rize

White Rize

Soya Bean

Pea 

Clower

Ray Seeds

Sunflower Seeds

Sugar Beet

Raw Coffee