You are here: Homepage / Products / Milling & Hulling / Small Scale Vertical Huller

Brochure & Data Sheets

Small Scale Vertical Huller

Product Code:

The Small Scale Vertical Huller uses the vertical abrasive, top to bottom working principle which has been proven to achieve the highest whole grain yield.

The grain enters the Huller via an inlet and is guided into the processing chamber by gravity. There, it is exposed to careful hulling of the grain surface between the eight abrasive rings of stone and the outer screen. The rotor is dynamically balanced a smooth running is assured. The Hulling intensity is controlled by two easily adjustable means the counterweight of the retaining gate and the gap between rotor and brakes. The fine setting is done by changing the counterweight position of the retaining gate, thus controlling the pressure within the Hulling chamber. The gravity flow of the product allows a trouble-free restart in case of an emergency shut-down.

Small Scale Vertical Huller Video



The Small Scale Vertical Huller Sm versatile enough to be adapted to various products such as Wheat, Barley, Peas, Lentil, Millet, Rice, Chickpea, Mung Beans. Designed to fulfill the highest needs in gentle Hulling. It is the perfect tool to obtain best surface treatment at highest whole grain yield. The machine can be operated and maintained with minimum effort. Due to its optimized sanitation concept, cleaning time is almost eliminated.

It can be used for small batches as well as in continues operation. A sifting Screen Separator connected to the output of the huller to separate small fractions from the out put.

Aspiration System:

The Small Scale Vertical Huller is equipped with an simple aspiration system that fulfills two tasks very efficiently: It cools the Grain and there by reduces breakage and supports the conveying of the husk out of the hulling chamber into the exhaust system. Therefore, aspiration air is guided partly through the product and partly around the screens. The aspiration hood, being easy to open or remove, gives full access to the heart of the machine. For best sanitation, no moving parts are involved in the hull removal system. The ammeter and the vacuum gauge allow the monitoring of the motor current and the negative pressure of the applied exhaust system.

A Mini Cyclone with Aspirator is connected to the Equipment.